 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 Mating - Unmating Summary Report PARTS DESCRIPTIONS TERMINAL SIDE BTE-020-01-F-D-A BTE-060-01-F-D-A BTE-120-01-F-D-A REV: Q BTS-025-01-F-D-A BTS-075-01-F-D-A BTS-150-01-F-D-A REV: B BTH-030-01-F-D-A BTH-090-01-F-D-A BTH-150-01-F-D-A REV: K MIT-019-01-F-D-A MIT-076-01-F-D-A MIT-133-01-F-D-A REV: C QTE-020-01-F-D-A QTE-060-01-F-D-A QTE-100-01-F-D-A REV: X QTS-025-01-F-D-A QTS-075-01-F-D-A QTS-125-01-F-D-A REV: A SOCKET SIDE BSE-020-01-F-D-A BSE-060-01-F-D-A BSE-120-01-F-D-A REV: D BSS-025-01-F-D-A BSS-075-01-F-D-A BSS-150-01-F-D-A REV: A BSH-030-01-F-D-A BSH-090-01-F-D-A BSH-150-01-F-D-A REV: D MIS-133-01-F-D-A MIS-019-01-F-D-A MIS-076-01-F-D-A REV: C QSE-020-01-F-D-A QSE-060-01-F-D-A QSE-100-01-F-D-A REV: R QSS-025-01-F-D-A QSS-075-01-F-D-A QSS-125-01-F-D-A REV: B QSH-030-01-F-D-A QSH-090-01-F-D-A QSH-150-01-F-D-A REV: F w w w File: J:\QA LAB\Test Programs\TC0106-0334\tc0106--0334.doc .d sh ta a ee u. t4 om c QTH-030-01-F-D-A QTH-090-01-F-D-A QTH-150-01-F-D-A REV: N Form 01 Rev 03 Page 1 of 18 www..com Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 CERTIFICATION All instruments and measuring equipment were calibrated to National Institute for Standards and Technology (NIST) traceable standards according to IS0 10012-l and ANSI/NCSL 2540-1, as applicable. All contents contained herein are the property of Samtec. No portion of this report, in part or in full shall be reproduced without prior written approval of Samtec. SCOPE To perform the following tests: Mating - Unmating APPLICABLE DOCUMENTS Standards: EIA Publication 364 TEST SAMPLES AND PREPARATION 1) All materials were manufactured in accordance with the applicable product specification. 2) All test samples were identified and encoded to maintain traceability throughout the test sequences. 3) After soldering, the parts to be used for LLCR testing were cleaned according to TLWI-0001: a) Sample test boards are to be ultrasonically cleaned after test lead attachment, preparation and/or soldering using the following process. b) Immerse the sample test boards into the Branson 3510 cleaner which contains Kyzen Ionox c) d) e) f) g) HC1 (or equivalent) cleaning solution with the following conditions: i) Temperature: 55 C+/- 5 C ii) Frequency: 40 KHz iii) Immersion Time: 5 to 10 Minutes Sample test boards are then slowly removed and placed into the Branson 3510 cleaner which contains deionized water with the following conditions: i) Temperature: 55 C +/- 5 C ii) Frequency: 40 KHz iii) Immersion Time: 5 to 10 Minutes Sample test boards are then removed and placed in a beaker, on a hot plate with a magnetic stirrer containing deionized water warmed to 55 C +/- 5 C for 1/2 to 1 minute (Use 55 C as target) Upon removal, the sample test boards are then rinsed for 1/2 to 1 minute in room temperature free flowing deionized water. After the final rinse, the sample test boards are to be dried in an air-circulating oven for 10 to 15 minutes at 50 C +/- 5 C (Use 50 C as target) Sample test boards are then allowed to set and recover to room ambient condition prior to testing. 4) Parts not intended for testing LLCR and DWV/IR are visually inspected and cleaned if necessary. 5) Any additional preparation will be noted in the individual test procedures. File: J:\QA LAB\Test Programs\TC0106-0334\tc0106--0334.doc Form 01 Rev 03 Page 2 of 18 Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 ATTRIBUTE DEFINITION Following is a brief, simplified description of the attribute measured. MATING/UNMATING: 1) Reference document: EIA-364-13, Mating and Unmating Forces Test Procedure for Electrical Connectors. 2) The full insertion position was to within 0.003" to 0.004" of the plug bottoming out in the receptacle to prevent damage to the system under test. 3) One of the mating parts is secured to a floating X-Y table to prevent damage during cycling. 4) Mating/Unmating forces were evaluated on the first cycle. 5) Number of Samples tested: 5 per series RESULTS BXX Series (data) _________________________________________________________________________________________________ * Mating Forces BXE Series Maximums o BXE 20 Positions 57.1 oz. o BXE 60 Positions 133.2 oz. o BXE 120 Positions 246.2 oz. Unmating Forces BXE Series Maximums o BXE 20 Positions 77.4 oz. o BXE 60 Positions 142.1 oz. o BXE 120 Positions 236.5 oz. _________________________________________________________________________________________________ * Mating Forces BXS Series Maximums o BXS 25 Positions o BXS 75 Positions o BXS 150 Positions * 61.0 oz. 179.8 oz. 320.4 3 oz. Unmating Forces BXS Series Maximums o BXS 25 Positions 59.5 oz. o BXS 75 Positions 234.7 oz. o BXS 150 Positions 325.0 oz. _________________________________________________________________________________________________ * Mating Forces BXH Series Maximums o BXH 30 Positions o BXH 90 Positions o BXH 150 Positions Unmating Forces BXH Series Maximums o BXH 30 Positions o BXH 90 Positions o BXH 150 Positions * 65.3 oz. 175.5 oz. 280.0 oz. * 66.6 oz. 182.2 oz 273.6 oz. Form 01 Rev 03 Page 3 of 18 File: J:\QA LAB\Test Programs\TC0106-0334\tc0106--0334.doc Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 RESULTS BXX Series (graphs) Trends BXX Series 350 300 250 200 Ounces 150 BXE Mating BXE Un-Matin BXS Mating BXS Un-Matin BXH Mating BXH Un-Matin 100 50 0 0 20 40 60 80 Number of Positions 100 120 140 160 File: J:\QA LAB\Test Programs\TC0106-0334\tc0106--0334.doc Form 01 Rev 03 Page 4 of 18 Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 RESULTS MIS Series (data) * Mating Forces MIS Series Maximums o MIS 1 Bank----------------------------------------- 115.2 oz. o MIS 4 Bank----------------------------------------- 360.5 oz. o MIS 7 Bank----------------------------------------- 694.6 oz. Unmating Forces MIS Series Maximums o MIS 1 Bank----------------------------------------- 109.3 oz. o MIS 4 Bank----------------------------------------- 293.3 oz. o MIS 7Bank ----------------------------------------- 541.1 oz. * Trends MIX Series 700.0 600.0 500.0 400.0 Ounces MIS Mating MIS Un-Matin 300.0 200.0 100.0 0.0 0 1 2 3 4 Number of Banks 5 6 7 8 File: J:\QA LAB\Test Programs\TC0106-0334\tc0106--0334.doc Form 01 Rev 03 Page 5 of 18 Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 RESULTS QXX Series (data) * Mating Forces QXE Series Maximums o QXE 1 Bank ------------------------------------------60.0 oz. o QXE 3 Bank ---------------------------------------- 163.8 oz. o QXE 5 Bank ---------------------------------------- 287.2 oz. Unmating Forces QXE Series Maximums o QXE 1 Bank ------------------------------------------64.2 oz. o QXE 3 Bank ---------------------------------------- 169.3 oz. o QXE 5 Bank ---------------------------------------- 302.1 oz. * _________________________________________________________________________________________________ * Mating Forces QXS Series Maximums o QXS 1 Bank ------------------------------------------60.6 oz. o QXS 3 Bank ---------------------------------------- 213.4 oz. o QXS 5 Bank ---------------------------------------- 339.2 oz. Unmating Forces QXS Series Maximums o QXS 1 Bank ------------------------------------------62.7 oz. o QXS 3 Bank ---------------------------------------- 187.4 oz. o QXS 5 Bank ---------------------------------------- 264.3 oz. * _________________________________________________________________________________________________ * Mating Forces QXH Series Maximums o QXH 1 Bank------------------------------------------72.0 oz. o QXH 3 Bank---------------------------------------- 232.6 oz. o QXH 5 Bank---------------------------------------- 434.6 oz. Unmating Forces QXH Series Maximums o QXH 1 Bank------------------------------------------74.9 oz. o QXH 3 Bank---------------------------------------- 213.3 oz. o QXH 5 Bank---------------------------------------- 396.2 oz. * File: J:\QA LAB\Test Programs\TC0106-0334\tc0106--0334.doc Form 01 Rev 03 Page 6 of 18 Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 RESULTS QXX Series (graphs) Trends QXX Series 450.0 400.0 350.0 300.0 QXE Mating QXE Un-Matin QXS Mating QXS Un-Matin QXH Mating QXH Un-Matin Ounces 250.0 200.0 150.0 100.0 50.0 0.0 0 1 2 3 Number of Banks 4 5 6 File: J:\QA LAB\Test Programs\TC0106-0334\tc0106--0334.doc Form 01 Rev 03 Page 7 of 18 Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 DATA SUMMARY MATING/UNMATING: BXE Series 20 Position Mating Ummating Oz Minimum Lbs Oz Lbs 60 Position Mating Ummating Oz Lbs Oz Lbs 120 Position Mating Ummating Oz Lbs Oz Lbs 48.3 3.0 59.0 3.7 Maximum 57.1 3.6 77.4 4.8 Average 50.4 3.2 68.8 4.3 123.0 133.3 129.5 7.7 8.3 8.1 118.7 142.1 129.1 7.4 224.3 14.0 190.4 11.9 8.9 246.2 15.4 236.5 14.8 8.1 238.2 14.9 215.7 13.5 BXS Series 25 Position Mating Ummating Oz Minimum Lbs Oz Lbs 75 Position Mating Ummating Oz Lbs Oz Lbs 150 Position Mating Ummating Oz Lbs Oz Lbs 53.0 3.3 53.0 3.3 161.1 10.1 214.7 13.4 271.2 17.0 279.8 17.5 61.0 3.8 59.5 3.7 179.8 11.2 234.7 14.7 320.5 20.0 325.0 20.3 Average 56.8 3.5 56.4 3.5 170.8 10.7 226.6 14.2 294.3 18.4 303.4 19.0 Maximum BXH Series 30 Position Mating Ummating Oz Minimum Lbs Oz Lbs 90 Position Mating Ummating Oz Lbs Oz Lbs 150 Position Mating Ummating Oz Lbs Oz Lbs 49.4 3.1 44.3 2.8 166.9 10.4 141.6 8.9 260.5 16.3 221.3 13.8 Maximum 65.3 4.1 66.6 4.2 175.5 11.0 182.2 11.4 280.0 17.5 273.6 17.1 Average 58.9 3.7 52.8 3.3 170.0 10.6 171.5 10.7 271.6 17.0 250.2 15.6 File: J:\QA LAB\Test Programs\TC0106-0334\tc0106--0334.doc Form 01 Rev 03 Page 8 of 18 Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 DATA SUMMARY continued MATING/UNMATING: MIS Series One Bank Mating Ummating Oz Minimum Lbs Oz Lbs Four Bank Mating Ummating Oz Lbs Oz Lbs Seven Bank Mating Ummating Oz Lbs Oz Lbs 81.0 5.1 85.9 5.4 303.2 19.0 203.2 12.7 579.7 36.2 457.1 28.6 115.2 7.2 109.3 6.8 360.5 22.5 293.3 18.3 694.6 43.4 541.1 33.8 Average 100.3 6.3 98.7 6.2 332.5 20.8 249.5 15.6 641.0 40.1 508.3 31.8 Maximum File: J:\QA LAB\Test Programs\TC0106-0334\tc0106--0334.doc Form 01 Rev 03 Page 9 of 18 Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 DATA SUMMARY continued MATING/UNMATING: QXE Series One Bank Mating Ummating Oz Minimum Lbs Oz Lbs Three Bank Mating Ummating Oz Lbs Oz Lbs Five Bank Mating Ummating Oz Lbs Oz Lbs 52.2 3.3 53.3 3.3 151.4 9.5 117.0 7.3 259.7 16.2 261.1 16.3 Maximum 60.0 3.8 64.2 4.0 163.8 10.2 169.3 10.6 287.2 18.0 302.1 18.9 Average 55.0 3.4 57.0 3.6 156.6 9.8 143.1 8.9 271.3 17.0 277.3 17.3 QXS Series One Bank Mating Ummating Oz Minimum Lbs Oz Lbs ThreeBank Mating Ummating Oz Lbs Oz Lbs Five Bank Mating Ummating Oz Lbs Oz Lbs 51.8 3.2 48.3 3.0 179.8 11.2 157.9 9.9 301.8 18.9 201.4 12.6 60.6 3.8 62.7 3.9 213.4 13.3 187.4 11.7 339.2 21.2 264.3 16.5 Average 55.6 3.5 56.4 3.5 200.2 12.5 177.7 11.1 316.5 19.8 234.4 14.7 Maximum QXH Series One Bank Mating Ummating Oz Minimum Lbs Oz Lbs Three Bank Mating Ummating Oz Lbs Oz Lbs Five Bank Mating Ummating Oz Lbs Oz Lbs 69.6 4.4 57.1 3.6 193.6 12.1 169.4 10.6 395.0 24.7 347.0 21.7 72.0 4.5 74.9 4.7 232.6 14.5 213.3 13.3 434.6 27.2 396.2 24.8 Average 71.1 4.4 65.2 4.1 207.8 13.0 190.1 11.9 410.9 25.7 371.2 23.2 Maximum File: J:\QA LAB\Test Programs\TC0106-0334\tc0106--0334.doc Form 01 Rev 03 Page 10 of 18 Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 DATA MATING/UNMATING: BXE Series Test Date: Operator: Temperature (C): Humidity (RH): Equipment Code Number Load Cell Code Number Readout Code Number Contact Description Contact Used In: Contact Mates With: 5/29/2002 GL 25 39% 59 60 5/29/2002 GL 25 39% 59 60 5/29/2002 GL 25 39% 59 60 BSE/BTE BSE/BTE 60 Position Mating Ummating Oz Lbs Oz Lbs BSE/BTE 120 Position Mating Ummating Oz Lbs Oz Lbs 20 Position Mating Ummating Sample# 1 2 3 4 5 Oz Lbs Oz Lbs 48.5 48.8 57.1 49.3 48.3 3.0 3.1 3.6 3.1 3.0 65.4 70.4 77.4 59.0 71.7 4.1 4.4 4.8 3.7 4.5 131.5 130.2 129.4 133.3 123.0 8.2 8.1 8.1 8.3 7.7 118.7 124.8 129.3 142.1 130.7 7.4 7.8 8.1 8.9 8.2 224.3 243.5 245.6 231.4 246.2 14.0 15.2 15.4 14.5 15.4 204.3 190.4 233.6 213.8 236.5 12.8 11.9 14.6 13.4 14.8 File: J:\QA LAB\Test Programs\TC0106-0334\tc0106--0334.doc Form 01 Rev 03 Page 11 of 18 Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 DATA continued MATING/UNMATING: BXS Series Test Date: Operator: Temperature (C): Humidity (RH): Equipment Code Number Load Cell Code Number Readout Code Number Contact Description Contact Used In: Contact Mates With: 5/29/2002 GL 25 37% 59 60 5/29/2002 GL 25 37% 59 60 5/29/2002 GL 25 37% 59 60 BSS/BTS BSS/BTS BSS/BTS 25 Position Mating Sample# 1 2 3 4 5 Oz Lbs 75 Position Mating Oz Lbs 150 Position Mating Oz Lbs Ummating Oz Lbs Ummating Oz Lbs Ummating Oz Lbs 53.0 61.0 56.0 56.8 57.1 3.3 3.8 3.5 3.6 3.6 55.8 58.1 53.0 55.5 59.5 3.5 3.6 3.3 3.5 3.7 179.8 171.8 177.3 161.1 164.0 11.2 10.7 11.1 10.1 10.3 232.0 234.7 225.3 226.2 214.7 14.5 14.7 14.1 14.1 13.4 320.5 271.2 287.7 289.3 302.9 20.0 17.0 18.0 18.1 18.9 324.2 289.6 279.8 298.6 325.0 20.3 18.1 17.5 18.7 20.3 File: J:\QA LAB\Test Programs\TC0106-0334\tc0106--0334.doc Form 01 Rev 03 Page 12 of 18 Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 DATA continued MATING/UNMATING: BXH Series Test Date: Operator: Temperature (C): Humidity (RH): Equipment Code Number Load Cell Code Number Readout Code Number Contact Description Contact Used In: 6/6/2002 GL 25 38% 59 60 6/6/2002 GL 25 38% 59 60 6/6/2002 GL 25 38% 59 60 BSH/BTH BSH/BTH 90 Position Mating Oz Lbs BSH/BTH 150 Position Mating Oz Lbs 30 Position Mating Sample# 1 2 3 4 5 Oz Lbs Ummating Oz Lbs Ummating Oz Lbs Ummating Oz Lbs 65.3 64.6 49.4 59.5 55.7 4.1 4.0 3.1 3.7 3.5 46.1 66.6 56.5 44.3 50.4 2.9 4.2 3.5 2.8 3.2 167.4 175.5 166.9 169.4 170.6 10.5 11.0 10.4 10.6 10.7 182.2 141.6 174.4 178.9 180.2 11.4 8.9 10.9 11.2 11.3 277.4 270.7 269.6 280.0 260.5 17.3 16.9 16.9 17.5 16.3 221.3 258.2 272.0 273.6 225.9 13.8 16.1 17.0 17.1 14.1 File: J:\QA LAB\Test Programs\TC0106-0334\tc0106--0334.doc Form 01 Rev 03 Page 13 of 18 Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 DATA continued MATING/UNMATING: MIS Series Test Date: Operator: Temperature (C): Humidity (RH): Equipment Code Number Load Cell Code Number Readout Code Number Contact Description Contact Used In: Contact Mates With: 5/30/2002 GL 21 48% 59 60 5/30/2002 GL 21 48% 59 60 5/30/2002 GL 21 48% 59 60 MIS/MIT MIS/MIT MIS/MIT One Bank Mating Ummating Sample# 1 2 3 4 5 Oz Lbs Oz Lbs Four Bank Mating Ummating Oz Lbs Oz Lbs Seven Bank Mating Ummating Oz Lbs Oz Lbs 81.0 100.8 115.2 102.1 102.4 5.1 6.3 7.2 6.4 6.4 85.9 109.3 91.0 107.4 99.7 5.4 6.8 5.7 6.7 6.2 332.0 337.1 303.2 360.5 329.8 20.8 21.1 19.0 22.5 20.6 293.3 231.4 203.2 276.5 243.4 18.3 14.5 12.7 17.3 15.2 598.2 677.8 654.7 694.6 579.7 37.4 42.4 40.9 43.4 36.2 457.1 535.2 510.4 541.1 497.6 28.6 33.5 31.9 33.8 31.1 File: J:\QA LAB\Test Programs\TC0106-0334\tc0106--0334.doc Form 01 Rev 03 Page 14 of 18 Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 DATA continued MATING/UNMATING: QXE Series Test Date: Operator: Temperature (C): Humidity (RH): Equipment Code Number Load Cell Code Number Readout Code Number Contact Description Contact Used In: 6/3/2002 GL 21 51% 59 60 6/3/2002 GL 21 51% 59 60 6/3/2002 GL 21 51% 59 60 QSE/QTE QSE/QTE Three Bank Mating Ummating Oz Lbs Lbs Lbs Lbs Lbs Lbs Oz Oz Oz Oz Oz Oz Lbs Lbs Lbs Lbs Lbs Lbs QSE/QTE Five Bank Mating Ummating Oz Lbs Lbs Lbs Lbs Lbs Lbs Oz Oz Oz Oz Oz Oz Lbs Lbs Lbs Lbs Lbs Lbs One Bank Mating Ummating Sample# 1 2 3 4 5 Oz Lbs Oz Lbs 58.2 60.0 52.3 52.2 52.2 3.6 3.8 3.3 3.3 3.3 56.3 64.2 53.3 56.0 55.0 3.5 4.0 3.3 3.5 3.4 8.0 7.3 9.4 9.4 10.6 16.3 18.9 17.2 16.9 17.4 File: J:\QA LAB\Test Programs\TC0106-0334\tc0106--0334.doc Form 01 Rev 03 Page 15 of 18 Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 DATA continued MATING/UNMATING: QXS Series Test Date: Operator: Temperature (C): Humidity (RH): Equipment Code Number Load Cell Code Number Readout Code Number Contact Description Contact Used In: 5/31/2002 GL 21 45% 59 60 5/31/2002 GL 21 45% 59 60 5/31/2002 GL 21 45% 59 60 QSS/QTS QSS/QTS Three Bank Mating Ummating Oz Lbs Oz Lbs QSS/QTS Five Bank Mating Ummating Oz Lbs Oz Lbs One Bank Mating Ummating Sample# 1 2 3 4 5 Oz Lbs Oz Lbs 57.8 54.1 60.6 53.8 51.8 3.6 3.4 3.8 3.4 3.2 57.8 48.3 62.7 57.0 56.5 3.6 3.0 3.9 3.6 3.5 210.6 197.4 199.8 179.8 213.4 13.2 12.3 12.5 11.2 13.3 187.4 182.1 178.7 157.9 182.6 11.7 11.4 11.2 9.9 11.4 319.8 301.8 306.1 339.2 315.5 20.0 18.9 19.1 21.2 19.7 255.5 243.5 201.4 264.3 207.4 16.0 15.2 12.6 16.5 13.0 File: J:\QA LAB\Test Programs\TC0106-0334\tc0106--0334.doc Form 01 Rev 03 Page 16 of 18 Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 DATA continued MATING/UNMATING: QXH Series Test Date: Operator: Temperature (C): Humidity (RH): Equipment Code Number Load Cell Code Number Readout Code Number Contact Description Contact Used In: 5/31/2002 GL 25 36% 59 60 5/31/2002 GL 25 36% 59 60 5/31/2002 GL 25 36% 59 60 QSH/QTH QSH/QTH Three Bank Mating Ummating Oz Lbs Oz Lbs QSH/QTH Five Bank Mating Ummating Oz Lbs Oz Lbs One Bank Mating Ummating Sample# 1 2 3 4 5 Oz Lbs Oz Lbs 71.8 72.0 70.4 71.8 69.6 4.5 4.5 4.4 4.5 4.4 57.1 63.4 66.9 64.0 74.9 3.6 4.0 4.2 4.0 4.7 198.6 208.2 206.2 232.6 193.6 12.4 13.0 12.9 14.5 12.1 206.1 186.1 213.3 175.5 169.4 12.9 11.6 13.3 11.0 10.6 408.8 409.0 407.2 395.0 434.6 25.6 25.6 25.5 24.7 27.2 382.9 374.6 347.0 355.4 396.2 23.9 23.4 21.7 22.2 24.8 File: J:\QA LAB\Test Programs\TC0106-0334\tc0106--0334.doc Form 01 Rev 03 Page 17 of 18 Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 EQUIPMENT AND CALIBRATION SCHEDULES Equipment #: 59 Description: Dillon Quantrol TC2 Test Stand Manufacturer: Dillon Quantrol Model: TC2 Serial #: 02-1033-03 Accuracy: Speed Accuracy: +/- 5% of indicated speed; Displacement: +/- 5 micrometers. ... Last Cal: 03/21/02, Next Cal: 03/21/03 Equipment #: 60 Description: 2500 N Load Cell for Dillon Quantrol Manufacturer: Dillon Quantrol Model: icell Serial #: 01-0132-01 Accuracy: .10% of capacity ... Last Cal: 3/21/02, Next Cal: 3/21/03 File: J:\QA LAB\Test Programs\TC0106-0334\tc0106--0334.doc Form 01 Rev 03 Page 18 of 18 |
Price & Availability of QTH-030-01-FDA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |